- Thickness: 0,08″
- Wide: 3,28 ft
- Length: 65,62 ft
- Area: 215.28 ft²
- Super hydrophobic
SIMPLE FOAM
Simple Foam | 0.08" (2mm)
The product acts by mass thickness
Based on low density, closed cell polyethene foam the product is available on 0,08 ̎, 0,20 ̎ and 0,39 ̎ thickness. The cell contains air trapped achieving a low heat conduction. Plus, they are totally waterproof and water vapor resistant. They have a low and inalterable thermal conductivity ʎ (0,035 W/m.K). This product adapts to several building systems, specially flooring bases, carpets, floating floors and radiant floors , it works as a vapor retarder. Grants a perfect leveling and performance impact, avoids ascending humidity, cold from the ground, it is fungus resistant and is also extremely durable.
DO NOT EXPOSE THE PRODUCT TO THE OPEN AIR MORE THAN 20 DAYS
Simple Foam | 0.20" (5mm)
- Thickness: 0,20″
- Wide: 3,28 ft
- Length: 65,62 ft
- Area: 215.28 ft²
- Super hydrophobic
The product acts by mass thickness
Based on low density, closed cell polyethene foam the product is available on 0,08 ̎, 0,20 ̎ and 0,39 ̎ thickness. The cell contains air trapped achieving a low heat conduction. Plus, they are totally waterproof and water vapor resistant. They have a low and inalterable thermal conductivity ʎ (0,035 W/m.K). This product adapts to several building systems, specially installing flooring bases, carpets, floating floors and radiant floors , it works as a vapor retarder. Grants a perfect leveling and performance impact, avoids ascending humidity, cold from the ground, it is fungus resistant and is also extremely durable.
DO NOT EXPOSE THE PRODUCT TO THE OPEN AIR MORE THAN 20 DAYS
Simple Foam | 0,39" (10mm)
- Thickness: 0,39″
- Wide: 3,28 ft
- Length: 65,62 ft
- Area: 215.28 ft²
- Super hydrophobic
The product acts by mass thickness
Based on low density, closed cell polyethene foam the product is available on 0,08 ̎, 0,20 ̎ and 0,39 ̎ thickness. The cell contains air trapped achieving a low heat conduction. Plus, they are totally waterproof and water vapor resistant. They have a low and inalterable thermal conductivity ʎ (0,035 W/m.K). This product adapts to several building systems, specially installing flooring bases, carpets, floating floors and radiant floors , it works as a vapor retarder. Grants a perfect leveling and performance impact, avoids ascending humidity, cold from the ground, it is fungus resistant and is also extremely durable.
DO NOT EXPOSE THE PRODUCT TO THE OPEN AIR MORE THAN 20 DAYS
ALUMINUM FOIL FOAM
Aluminium Foil Foam| 0,20" (5mm) | 1 SIDE
- Thickness: 0,20″
- Sides: 1
- Width: 3.28 ft
- Length: 65.62 ft
- Area: 215.28 ft²
- Blocking power: 85%
It is a low density, closed cell product based on polyethene foam available in 0,20 ̎ and 0,39 ̎ adapting to the clients’ desire. In opposition to simple foams, this one has a reflective sheet called aluminum foil, in only one of its sides, having an 85% reflective power in the presence of heat. This phenomenon is called reflective insulation, which works within the polyethene foam insulation mass that provides the closed cell. This aluminum foil grants the product an additional capacity of insulation without requiring to major foam thickness. Another important characteristic that must be mentioned is its behavior in fire, it is fireproof material, it has the capacity to delay flames in a fire, so that it gives time to firemen or people to put out the fire. According to the tests ran by the National Institute of Industrial Technology (INTI) under the ASTM E 162 and IRAM 11910-3 regulations, the results were Class B RE 3 “low flame propagation material”
Thermal Resistance= 1,10 m² K/W
DO NOT EXPOSE THE PRODUCT TO THE OPEN AIR MORE THAN 20 DAYS
Aluminium Foil Foam| 0,20" (5mm) | 2 SIDES
- Thickness: 0,20″
- Sides: 2
- Width: 3.28 ft
- Length: 65.62 ft
- Area: 215.28 ft²
- Blocking power: 90%
It is a low density, closed cell product based on polyethene foam available in 0,20 ̎ and 0,39 ̎ adapting to the clientsˈ desire. In opposition to simple foams, this one has a reflective sheet called aluminum foil, in both of its sides, having an 90% reflective power in the presence of heat. This phenomenon is called reflective insulation, which works within the polyethene foam insulation mass that provides the closed cell. This aluminum foil grants the product an additional capacity of insulation without requiring to major foam thickness. Another important characteristic that must be mentioned is its behavior in fire, it is fireproof material, it has the capacity to delay flames in a fire, so that it gives time to firemen or people to put out the fire. According to the tests ran by the National Institute of Industrial Technology (INTI) under the ASTM E 162 and IRAM 11910-3 regulations, the results were Class B RE 3 “low flame propagation material”
Thermal Resistance= 1,62 m² K/W
DO NOT EXPOSE THE PRODUCT TO THE OPEN AIR MORE THAN 20 DAYS
Aluminium Foil Foam| 0,39" (10mm) | 1 SIDE
- Thickness: 0,39″
- Sides: 1
- Width: 3.28 ft
- Length: 65.62 ft
- Area: 215.28 ft²
- Blocking power: 85%
It is a low density, closed cell product based on polyethene foam available in 0,20 ̎ and 0,39 ̎ adapting to the clientsˈ desire. In opposition to simple foams, this one has a reflective sheet called aluminum foil, in only one of its sides, having an 85% reflective power in the presence of heat. This phenomenon is called reflective insulation, which works within the polyethene foam insulation mass that provides the closed cell. This aluminum foil grants the product an additional capacity of insulation without requiring to major foam thickness. Another important characteristic that must be mentioned is its behavior in fire, it is fireproof material, it has the capacity to delay flames in a fire, so that it gives time to firemen or people to put out the fire. According to the tests ran by the National Institute of Industrial Technology (INTI) under the ASTM E 162 and IRAM 11910-3 regulations, the results were Class B RE 3 “low flame propagation material”
Thermal Resistance= 1,26 m² K/W
DO NOT EXPOSE THE PRODUCT TO THE OPEN AIR MORE THAN 20 DAYS
Aluminium Foil Foam| 0,39" (10mm) | 2 SIDES
- Thickness: 0,39
- Sides: 2
- Width: 3.28 ft
- Length: 65.62 ft
- Area: 215.28 ft²
- Blocking power: 90%
It is a low density, closed cell product based on polyethene foam available in 0,20 ̎ and 0,39 ̎ adapting to the clientsˈ desire. In opposition to simple foams, this one has a reflective sheet called aluminum foil, in both of its sides, having an 90% reflective power in the presence of heat. This phenomenon is called reflective insulation, which works within the polyethene foam insulation mass that provides the closed cell. This aluminum foil grants the product an additional capacity of insulation without requiring to major foam thickness. Another important characteristic that must be mentioned is its behavior in fire, it is fireproof material, it has the capacity to delay flames in a fire, so that it gives time to firemen or people to put out the fire. According to the tests ran by the National Institute of Industrial Technology (INTI) under the ASTM E 162 and IRAM 11910-3 regulations, the results were Class B RE 3 “low flame propagation material”
Thermal Resistance= 1,80 m² K/W
DO NOT EXPOSE THE PRODUCT TO THE OPEN AIR MORE THAN 20 DAYS
ALUMINUM FOAM
Aluminum Foam | 0,20" (5mm) | 1 SIDE
- Thickness: 0,20″
- Sides: 1
- Width: 3,28 ft
- Length: 65,62 ft
- Area: 215.28 ft²
- Blocking power: 95%
Based on low density, closed cell polyethene foam the product is available on 0,20 ̎ and 0,39 ̎ thickness adapting to the clients ̍ needs. In comparison to the aluminum foil foam, this product contains a pure aluminum reflective sheet on one of its sides obtaining a 95% reflecting power within heat contact. This phenomenon is called reflective insulation, which works within the polyethene foam insulation mass that provides the closed cell structure. This aluminum foil grants the product an additional capacity of insulation without requiring to major foam thickness. Another important characteristic that must be mentioned is its behavior in fire, it is fireproof material, it has the capacity to delay flames in a fire, so that it gives time to firemen or people to put out the fire. According to the tests ran by the National Institute of Industrial Technology (INTI) under the ASTM E 162 and IRAM 11910-3 regulations, the results were Class A RE 3 “low flame propagation material”
Thermal Resistance= 2,41 m² K/W
DO NOT EXPOSE THE PRODUCT TO THE OPEN AIR MORE THAN 20 DAYS
Aluminum Foam | 0,20" (5mm) | 2 SIDES
- Thickness: 0,20″
- Sides: 2
- Width: 3,28 ft
- Length: 65,62 ft
- Area: 215.28 ft²
- Blocking power: 97%
Based on low density, closed cell polyethene foam the product is available on 0,20 ̎ and 0,39 ̎ thickness adapting to the clients ̍ needs. In comparison to the aluminum foil foam, this product contains 2 pure aluminum reflective sheets on both of its sides obtaining a 97% reflecting power within heat contact. This phenomenon is called reflective insulation, which works within the polyethene foam insulation mass that provides the closed cell structure. This aluminum foil grants the product an additional capacity of insulation without requiring to major foam thickness. Another important characteristic that must be mentioned is its behavior in fire, it is fireproof material, it has the capacity to delay flames in a fire, so that it gives time to firemen or people to put out the fire. According to the tests ran by the National Institute of Industrial Technology (INTI) under the ASTM E 162 and IRAM 11910-3 regulations, the results were Class A RE 2 “very low flame propagation material”
Thermal Resistance = 2,60 m² K/W
DO NOT EXPOSE THE PRODUCT TO THE OPEN AIR MORE THAN 20 DAYS
Aluminum Foam | 0,39" (10mm) | 1 SIDE
- Thickness: 0,39″
- Sides: 1
- Width: 3,28 ft
- Length: 65,62 ft
- Area: 215.28 ft²
- Blocking power: 95%
Based on low density, closed cell polyethene foam the product is available on 0,20 ̎ and 0,39 ̎ thickness adapting to the clients ̍ needs. In comparison to the aluminum foil foam, this product contains a pure aluminum reflective sheet on one of its sides obtaining a 95% reflecting power within heat contact. This phenomenon is called reflective insulation, which works within the polyethene foam insulation mass that provides the closed cell structure. This aluminum foil grants the product an additional capacity of insulation without requiring to major foam thickness. Another important characteristic that must be mentioned is its behavior in fire, it is fireproof material, it has the capacity to delay flames in a fire, so that it gives time to firemen or people to put out the fire. According to the tests ran by the National Institute of Industrial Technology (INTI) under the ASTM E 162 and IRAM 11910-3 regulations, the results were Class A RE 3 “low flame propagation material”
Thermal Resistance = 2,58 m² K/W
DO NOT EXPOSE THE PRODUCT TO THE OPEN AIR MORE THAN 20 DAYS
NO EXPONER A LA INTENPERIE MAS DE 20 DIAS
Aluminum Foam | 0,39" (10mm) | 2 SIDES
- Thickness: 0,39″
- Sides: 2
- Width: 3,28 ft
- Length: 65,62 ft
- Area: 215.28 ft²
- Blocking power: 97%
Based on low density, closed cell polyethene foam the product is available on 0,20 ̎ and 0,39 ̎ thickness adapting to the clients ̍ needs. In comparison to the aluminum foil foam, this product contains 2 pure aluminum reflective sheets on both of its sides obtaining a 97% reflecting power within heat contact. This phenomenon is called reflective insulation, which works within the polyethene foam insulation mass that provides the closed cell structure. This aluminum foil grants the product an additional capacity of insulation without requiring to major foam thickness. Another important characteristic that must be mentioned is its behavior in fire, it is fireproof material, it has the capacity to delay flames in a fire, so that it gives time to firemen or people to put out the fire. According to the tests ran by the National Institute of Industrial Technology (INTI) under the ASTM E 162 and IRAM 11910-3 regulations, the results were Class A RE 3 “very low flame propagation material”
Thermal Resistance = 2,77 m² K/W
DO NOT EXPOSE THE PRODUCT TO THE OPEN AIR MORE THAN 20 DAYS